• User

    [Risolto] Connessione Wireless ad Internet

    Salve a tutti. Io utilizzo Linux, precisamente la distribuzione Ubuntu 7.04 ed ho il seguente problema: attualmente sono connesso via cavo mediante un modem router della D-Link (modello DSL-G624T). Vorrei usare ora la relativa penna USB (modello DWL-G122) per collegarmi in modalità wireless.

    Sono andato sul sito http://ndiswrapper.sourceforge.net/joomla/...33/id,list_c-f/, però ci sono diversi driver a seconda della tipologia del chipset della penna.

    Io (con la penna inserita) ho digitato da terminale sudo dmesg -c per avere notizie al riguardo, ma il listato che viene fuori non è di semplice lettura.
    Eccolo:

    [ 0.000000] Linux version 2.6.20-16-generic ([email protected]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] sanitize start
    [ 0.000000] sanitize end
    [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
    [ 0.000000] copy_e820_map() type is E820_RAM
    [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
    [ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
    [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
    [ 0.000000] copy_e820_map() type is E820_RAM
    [ 0.000000] copy_e820_map() start: 000000001fff0000 size: 0000000000003000 end: 000000001fff3000 type: 4
    [ 0.000000] copy_e820_map() start: 000000001fff3000 size: 000000000000d000 end: 0000000020000000 type: 3
    [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
    [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
    [ 0.000000] copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    [ 0.000000] 0MB HIGHMEM available.
    [ 0.000000] 511MB LOWMEM available.
    [ 0.000000] found SMP MP-table at 000f4d10
    [ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0 -> 4096
    [ 0.000000] Normal 4096 -> 131056
    [ 0.000000] HighMem 131056 -> 131056
    [ 0.000000] early_node_map[1] active PFN ranges
    [ 0.000000] 0: 0 -> 131056
    [ 0.000000] On node 0 totalpages: 131056
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
    [ 0.000000] Normal zone: 991 pages used for memmap
    [ 0.000000] Normal zone: 125969 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 0 pages used for memmap
    [ 0.000000] DMI 2.3 present.
    [ 0.000000] ACPI: RSDP (v000 GBT ) @ 0x000f6680
    [ 0.000000] ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3000
    [ 0.000000] ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3040
    [ 0.000000] ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff7380
    [ 0.000000] ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] Processor #0 6:8 APIC version 16
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
    [ 0.000000] Detected 1808.526 MHz processor.
    [ 18.883247] Built 1 zonelists. Total pages: 130033
    [ 18.883252] Kernel command line: root=UUID=b1a10747-84fd-4e58-9b3a-ada9249b29ab ro quiet splash
    [ 18.883437] mapped APIC to ffffd000 (fee00000)
    [ 18.883440] mapped IOAPIC to ffffc000 (fec00000)
    [ 18.883444] Enabling fast FPU save and restore... done.
    [ 18.883447] Enabling unmasked SIMD FPU exception support... done.
    [ 18.883460] Initializing CPU#0
    [ 18.883538] PID hash table entries: 2048 (order: 11, 8192 bytes)
    [ 18.884524] Console: colour VGA+ 80x25
    [ 18.884974] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 18.885315] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 18.902533] Memory: 508728k/524224k available (1992k kernel code, 14944k reserved, 900k data, 328k init, 0k highmem)
    [ 18.902545] virtual kernel memory layout:
    [ 18.902546] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
    [ 18.902548] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 18.902549] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    [ 18.902550] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    [ 18.902552] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
    [ 18.902553] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
    [ 18.902555] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
    [ 18.902558] Checking if this processor honours the WP bit even in supervisor mode... Ok.
    [ 18.979508] Calibrating delay using timer specific routine.. 3620.18 BogoMIPS (lpj=7240372)
    [ 18.979560] Security Framework v1.0.0 initialized
    [ 18.979569] SELinux: Disabled at boot.
    [ 18.979589] Mount-cache hash table entries: 512
    [ 18.979775] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
    [ 18.979785] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    [ 18.979788] CPU: L2 Cache: 256K (64 bytes/line)
    [ 18.979791] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
    [ 18.979804] Compat vDSO mapped to ffffe000.
    [ 18.979811] Remapping vsyscall page to ffffe000
    [ 18.979823] Checking 'hlt' instruction... OK.
    [ 18.995655] SMP alternatives: switching to UP code
    [ 18.995959] Freeing SMP alternatives: 11k freed
    [ 18.996264] Early unpacking initramfs... done
    [ 19.334480] ACPI: Core revision 20060707
    [ 19.337059] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
    [ 19.341745] CPU0: AMD Athlon? XP 2200+ stepping 01
    [ 19.341775] Total of 1 processors activated (3620.18 BogoMIPS).
    [ 19.342511] ENABLING IO-APIC IRQs
    [ 19.342817] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 19.487371] Brought up 1 CPUs
    [ 19.487690] Booting paravirtualized kernel on bare hardware
    [ 19.487797] Time: 15:50:03 Date: 07/16/107
    [ 19.487838] NET: Registered protocol family 16
    [ 19.487962] EISA bus registered
    [ 19.487967] ACPI: bus type pci registered
    [ 19.493053] PCI: PCI BIOS revision 2.10 entry at 0xfa0f0, last bus=1
    [ 19.493056] PCI: Using configuration type 1
    [ 19.493058] Setting up standard PCI resources
    [ 19.504704] ACPI: Interpreter enabled
    [ 19.504712] ACPI: Using IOAPIC for interrupt routing
    [ 19.505394] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [ 19.505400] PCI: Probing PCI hardware (bus 00)
    [ 19.506165] Boot video device is 0000:01:00.0
    [ 19.506247] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
    [ 19.529941] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
    [ 19.530286] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
    [ 19.530629] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
    [ 19.530972] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
    [ 19.531421] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
    [ 19.531834] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
    [ 19.532267] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) 0, disabled.
    [ 19.532681] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) 0, disabled.
    [ 19.535696] Linux Plug and Play Support v0.97 © Adam Belay
    [ 19.535712] pnp: PnP ACPI init
    [ 19.540111] pnp: PnP ACPI: found 15 devices
    [ 19.540118] PnPBIOS: Disabled by ACPI PNP
    [ 19.540189] PCI: Using ACPI for IRQ routing
    [ 19.540193] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    [ 19.563765] NET: Registered protocol family 8
    [ 19.563767] NET: Registered protocol family 20
    [ 19.564144] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
    [ 19.564148] pnp: 00:02: ioport range 0x40f0-0x40ff could not be reserved
    [ 19.564151] pnp: 00:02: ioport range 0x5000-0x500f has been reserved
    [ 19.564495] PCI: Bridge: 0000:00:01.0
    [ 19.564499] IO window: c000-cfff
    [ 19.564504] MEM window: e8000000-e9ffffff
    [ 19.564508] PREFETCH window: d8000000-e7ffffff
    [ 19.564526] PCI: Setting latency timer of device 0000:00:01.0 to 64
    [ 19.564560] NET: Registered protocol family 2
    [ 19.603389] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    [ 19.603502] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [ 19.603750] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 19.603877] TCP: Hash tables configured (established 16384 bind 8192)
    [ 19.603881] TCP reno registered
    [ 19.615426] checking if image is initramfs... it is
    [ 20.251821] Freeing initrd memory: 6751k freed
    [ 20.252410] audit: initializing netlink socket (disabled)
    [ 20.252428] audit(1187279403.452:1): initialized
    [ 20.252563] VFS: Disk quotas dquot_6.5.1
    [ 20.252590] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 20.252651] io scheduler noop registered
    [ 20.252655] io scheduler anticipatory registered
    [ 20.252658] io scheduler deadline registered
    [ 20.252666] io scheduler cfq registered (default)
    [ 20.252728] PCI: Bypassing VIA 8237 APIC De-Assert Message
    [ 20.252981] isapnp: Scanning for PnP cards...
    [ 20.606424] isapnp: No Plug & Play device found
    [ 20.651610] Real Time Clock Driver v1.12ac
    [ 20.651670] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    [ 20.651789] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 20.652060] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 20.652969] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 20.653392] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 20.653770] mice: PS/2 mouse device common for all mice
    [ 20.654453] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
    [ 20.654753] input: Macintosh mouse button emulation as /class/input/input0
    [ 20.654793] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    [ 20.654798] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    [ 20.655142] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 20.656073] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 20.656082] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 20.656260] EISA: Probing bus 0 at eisa.0
    [ 20.656281] Cannot allocate resource for EISA slot 4
    [ 20.656284] Cannot allocate resource for EISA slot 5
    [ 20.656296] EISA: Detected 0 cards.
    [ 20.686397] TCP cubic registered
    [ 20.686405] NET: Registered protocol family 1
    [ 20.686434] Using IPI No-Shortcut mode
    [ 20.686505] ACPI: (supports S0 S1 S4 S5)
    [ 20.686561] Magic number: 3:592:841
    [ 20.686710] hash matches device ptyu7
    [ 20.686727] hash matches device ptyra
    [ 20.686850] Time: tsc clocksource has been installed.
    [ 20.687270] Freeing unused kernel memory: 328k freed
    [ 20.709449] input: AT Translated Set 2 keyboard as /class/input/input1
    [ 21.947044] Capability LSM initialized
    [ 22.602464] ieee1394: Initialized config rom entry `ip1394'
    [ 22.604022] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 16
    [ 22.680131] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[ea000000-ea0007ff] Max Packet=[2048] IR/IT contexts=[8/8]
    [ 22.697112] usbcore: registered new interface driver usbfs
    [ 22.697145] usbcore: registered new interface driver hub
    [ 22.697174] usbcore: registered new device driver usb
    [ 22.698305] USB Universal Host Controller Interface driver v3.0
    [ 22.698819] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
    [ 22.698822] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
    [ 22.698834] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
    [ 22.698848] uhci_hcd 0000:00:10.0: UHCI Host Controller
    [ 22.699032] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
    [ 22.699069] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400
    [ 22.699237] usb usb1: configuration #1 chosen from 1 choice
    [ 22.699270] hub 1-0:1.0: USB hub found
    [ 22.699283] hub 1-0:1.0: 2 ports detected
    [ 22.763042] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    [ 22.802400] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
    [ 22.802418] uhci_hcd 0000:00:10.1: UHCI Host Controller
    [ 22.802448] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
    [ 22.802475] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800
    [ 22.802604] usb usb2: configuration chosen from 1 choice
    [ 22.802645] hub 2-0:1.0: USB hub found
    [ 22.802657] hub 2-0:1.0: 2 ports detected
    [ 22.861983] Floppy drive(s): fd0 is 1.44M
    [ 22.906313] ACPI: PCI Interrupt 0000:00:10.2
    -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
    [ 22.906331] uhci_hcd 0000:00:10.2: UHCI Host Controller
    [ 22.906360] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
    [ 22.906387] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00
    [ 22.906516] usb usb3: configuration chosen from 1 choice
    [ 22.906550] hub 3-0:1.0: USB hub found
    [ 22.906563] hub 3-0:1.0: 2 ports detected
    [ 22.921696] FDC 0 is a post-1991 82077
    [ 23.013941] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
    [ 23.017231] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
    [ 23.017238] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
    [ 23.017251] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18
    [ 23.017268] VP_IDE: chipset revision 6
    [ 23.017270] VP_IDE: not 100% native mode: will probe irqs later
    [ 23.017287] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
    [ 23.017297] ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
    [ 23.017312] ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
    [ 23.017323] Probing IDE interface ide0...
    [ 23.434002] hda: Maxtor 6L160P0, ATA DISK drive
    [ 23.881847] hdb: LITEON DVD-ROM LTD-165H, ATAPI CD/DVD-ROM drive
    [ 23.940929] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    [ 23.961976] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00601d0000003799]
    [ 23.964330] Probing IDE interface ide1...
    [ 24.377667] hdc: MAXTOR 6L040J2, ATA DISK drive
    [ 25.161393] hdd: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
    [ 25.217828] ide1 at 0x170-0x177,0x376 on irq 15
    [ 25.243954] SCSI subsystem initialized
    [ 25.250755] libata version 2.20 loaded.
    [ 25.253578] ACPI: PCI Interrupt 0000:00:10.4 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
    [ 25.253599] ehci_hcd 0000:00:10.4: EHCI Host Controller
    [ 25.253940] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
    [ 25.254004] ehci_hcd 0000:00:10.4: irq 17, io mem 0xea001000
    [ 25.254011] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [ 25.254634] usb usb4: configuration chosen from 1 choice
    [ 25.254906] hub 4-0:1.0: USB hub found
    [ 25.254925] hub 4-0:1.0: 6 ports detected
    [ 25.265917] hda: max request size: 512KiB
    [ 25.282783] hda: Host Protected Area detected.
    [ 25.282787] current capacity is 320170943 sectors (163927 MB)
    [ 25.282789] native capacity is 320173056 sectors (163928 MB)
    [ 25.291857] hda: Host Protected Area disabled.
    [ 25.291865] hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63
    [ 25.293444] hda: cache flushes supported
    [ 25.293504] hda: hda1
    [ 25.311328] hdc: max request size: 128KiB
    [ 25.311674] hdc: Host Protected Area detected.
    [ 25.311676] current capacity is 78175679 sectors (40025 MB)
    [ 25.311678] native capacity is 78177792 sectors (40027 MB)
    [ 25.311913] hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(44)
    [ 25.311921] Uniform CD-ROM driver Revision: 3.20
    [ 25.316127] hdc: Host Protected Area disabled.
    [ 25.316130] hdc: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133)
    [ 25.316303] hdc: cache flushes supported
    [ 25.316328] hdc: hdc1 hdc2 < hdc5 >
    [ 25.353274] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
    [ 25.357581] 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
    [ 25.357587] 8139cp 0000:00:13.0: Try the "8139too" driver instead.
    [ 25.359615] 8139too Fast Ethernet driver 0.9.28
    [ 25.359684] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 19
    [ 25.359992] eth0: RealTek RTL8139 at 0xe0884000, 00:0d:61:a5:82:c4, IRQ 19
    [ 25.359994] eth0: Identified 8139 chip type 'RTL-8101'
    [ 25.649826] Attempting manual resume
    [ 25.649831] swsusp: Resume From Partition 22:5
    [ 25.649833] PM: Checking swsusp image.
    [ 25.650092] PM: Resume from disk failed.
    [ 25.677897] kjournald starting. Commit interval 5 seconds
    [ 25.677915] EXT3-fs: mounted filesystem with ordered data mode.
    [ 36.224049] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    [ 37.512892] NET: Registered protocol family 17
    [ 38.560900] Linux agpgart interface v0.102 © Dave Jones
    [ 38.635428] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 38.639136] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 38.675851] agpgart: Detected VIA KT400/KT400A/KT600 chipset
    [ 38.684830] agpgart: AGP aperture is 128M @ 0xd0000000
    [ 39.365130] input: PC Speaker as /class/input/input2
    [ 39.424794] input: PS2++ Logitech Wheel Mouse as /class/input/input3
    [ 39.476001] parport: PnPBIOS parport detected.
    [ 39.476045] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 39.870133] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
    [ 39.870140] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
    [ 39.870151] ACPI: PCI Interrupt 0000:00:11.5 -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20
    [ 39.870499] PCI: Setting latency timer of device 0000:00:11.5 to 64
    [ 40.586398] lp0: using parport0 (interrupt-driven).
    [ 40.654902] Adding 1502036k swap on /dev/disk/by-uuid/29f08965-d783-494f-8505-67a6d07fb4db. Priority:-1 extents:1 across:1502036k
    [ 40.725774] EXT3 FS on hdc1, internal journal
    [ 43.281777] NET: Registered protocol family 10
    [ 43.281896] lo: Disabled Privacy Extensions
    [ 46.575752] input: Power Button (FF) as /class/input/input4
    [ 46.581548] ACPI: Power Button (FF) [PWRF]
    [ 46.625693] input: Power Button (CM) as /class/input/input5
    [ 46.631421] ACPI: Power Button (CM) [PWRB]
    [ 46.654959] Using specific hotkey driver
    [ 46.693788] No dock devices found.
    [ 46.748128] ibm_acpi: ec object not found
    [ 46.908063] pcc_acpi: loading...
    [ 51.956874] [drm] Initialized drm 1.1.0 20060810
    [ 51.972402] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
    [ 51.976681] [drm] Initialized radeon 1.25.0 20060524 on minor 0
    [ 53.083177] ppdev: user-space parallel port driver
    [ 53.738110] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
    [ 53.738250] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
    [ 53.738390] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
    [ 54.031093] [drm] Setting GART location based on new memory map
    [ 54.031108] [drm] Loading R200 Microcode
    [ 54.031149] [drm] writeback test succeeded in 1 usecs
    [ 54.448798] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [ 54.448805] apm: overridden by ACPI.
    [ 56.415053] Bluetooth: Core ver 2.11
    [ 56.415156] NET: Registered protocol family 31
    [ 56.415159] Bluetooth: HCI device and connection manager initialized
    [ 56.415164] Bluetooth: HCI socket layer initialized
    [ 56.560888] Bluetooth: L2CAP ver 2.8
    [ 56.560895] Bluetooth: L2CAP socket layer initialized
    [ 57.301378] Bluetooth: RFCOMM socket layer initialized
    [ 57.301401] Bluetooth: RFCOMM TTY layer initialized
    [ 57.301403] Bluetooth: RFCOMM ver 1.8
    [ 68.090000] eth0: no IPv6 routers present
    [ 1162.751866] usb 4-1: new high speed USB device using ehci_hcd and address 2
    [ 1163.027152] usb 4-1: configuration chosen from 1 choice
    [ 1163.254634] Loading module: rt2x00lib - CVS (N/A) by http://rt2x00.serialmonkey.com.
    [ 1163.261473] Loading module: rt73usb - CVS (N/A) by http://rt2x00.serialmonkey.com.
    [ 1163.525252] usbcore: registered new interface driver rt73usb
    [ 1163.599731] usbcore: registered new interface driver rt2570
    [ 1163.829385] wmaster0: Selected rate control algorithm 'simple'
    [ 1164.079932] wlan0: starting scan
    [ 1165.067028] wlan0: scan completed
    [ 1185.172188] wlan0: starting scan
    [ 1186.167510] wlan0: scan completed
    [ 1206.188591] wlan0: starting scan
    [ 1207.184026] wlan0: scan completed

    Se qualcuno mi può essere d'aiuto lo ringrazio anticipatamente. :ciaosai:


  • User Attivo

    Ciao RedRay68,
    Scusa se mi permetto, ma una visitina sul sito del produttore per vedere se ci sono le specifiche tecniche ?
    E quando anche non ci fossero, una bella email ?
    Con Ubuntu, ho dovuto (mio malgrado) cestinare un paio di periferiche USB perchè non supportate, supportano solo win.
    Saluti
    Luca


  • User Attivo

    Ciao RedRay68 e Benvenuto nel forum GT 🙂

    In realtà Linux ha già trovato un driver per te, guarda un po qui:

    @RedRay68 said:

    http://ndiswrapper.sourceforge.net/joomla/...33/id,list_c-f/

    [ 1163.254634] Loading module: rt2x00lib - CVS (N/A) by http://rt2x00.serialmonkey.com.
    [ 1163.261473] Loading module: rt73usb - CVS (N/A) by http://rt2x00.serialmonkey.com.
    [ 1163.525252] usbcore: registered new interface driver rt73usb
    [ 1163.599731] usbcore: registered new interface driver rt2570

    ti ha caricato il modulo rt73usb. Comunque, puoi fare anche un **lsusb -v **e vedere le specificazioni dei dispositivi usb attaccati al tuo pc.

    Ciao :ciauz:

    Amarant


  • User

    @voidcomputer said:

    Ciao RedRay68,
    Scusa se mi permetto, ma una visitina sul sito del produttore per vedere se ci sono le specifiche tecniche ?
    E quando anche non ci fossero, una bella email ?
    Luca

    Scusa se non sono stato esauriente nel mio messaggio,ma nè nella guida sul CD di installazione (per Windows...) nè sul sito del produttore ho avuto utili informazioni al riguardo, e la mia e-mail con questa richiesta non ha ancora avuto risposta... :bho:

    Per quel che riguarda i link di linux non ci avevo fatto attenzione :arrabbiato: (perciò dicevo che il messaggio non era di facile lettura...).

    Per ora grazie Amarant,faccio un pò di ricerche e ti faccio sapere. 🙂


  • User

    Eureka!!!! :brindisi:

    Ho seguito pazientemente il tuo consiglio, Amarant: andando sul sito che il messaggio mi indicava ho scaricato il driver relativo e, seguendo passo passo quanto riportato nel file Readme, sono riuscito in quella che mi sembrava un'impresa ardua.

    Finalmente sono connesso wireless e (checchè se ne dica) con Ubuntu 7.04!!

    Davvero grazie di cuore :ciaosai: